#

Interventional Systems

A broad expanse of interventional system components and devices, including Manifolds, Hemostatic Y connectors, Introducer sets, High pressure lines, Guide Wires and Transducers. Fully customizable Cathlab kits and procedure packs are available.

Interventional Systems

Manifold


Choice of 2, 3 or 4 Core
Options of colour handle
Clear material for easy detection of bubbles
Large bore for maximum flow 500 PSI

Specifications


4 Core
3 Core
2 Core
On Handle
B-MN-4RF
B-MN-3RN
B-MN-2RN
Off Handle
B-MN-4RF
B-MN-3RF
B-MN-2RF
On Handle

Control Syringe


Choice of 10cc, 12cc or 20cc capacity
Low friction hub
Bold marking for correct measurement of dosage
Finger grips for one hand operation
Rotating male luer lock

Specifications


10cc
12cc
20cc
B-CSR-10RL
B-CSR-12RL
B-CSR-20RL
B-CSR-10RL

Pressure Monitoring Line & Pressure Transducer


PM Lines:
Choice of length from 6″ to 84”
Choice of colour – Red, Blue, Yellow & Transparent
Minimum Priming Volume
ID 1.27 mm x OD 2.79 mm

Disposable Transducer Systems: For Invasive Pressure monitoring compatible with all Hemodynamic systems

Pressure Monitoring

Contrast Line


Customised sets available upon request

Specifications


B-OT-26
B-OT-26

High Pressure Line


Choice of length from 10″, 20″ or 48” Braided PU material,1200 PSI rating Rotating male luer lock

Also available in PVC material upon request

Specifications


10″
20″
48″
B-HPT10
B-HPT20
B-HPT48
products

Guide Wires


Variety of guide wires available in following variants:

O.D. 0.018″, 0.021″, 0.025″, 0.032″, 0.035″, 0.038″
Length 45cm, 60cm, 70cm, 150cm, 300cm
Material Stainless steel wires with PTFE coated and Non coated, Nickle titanium
Stainless steel

Specifications


For guide wire – Length 150cm, PTFE coated

0.018″ 0.021″ 0.025″ 0.032″ 0.035″ 0.038”
J Tip B-GW018-150J B-GW021-150J B-GW025-150J B-GW032-150J B-GW035-150J B-GW038-150J
Straight Tip B-GW018-150ST B-GW021-150ST B-GW025-150ST B-GW032-150ST B-GW035-150ST B-GW038-150ST

The Hydrophilic wires also available upon request. PTFE Guide wire available in 260 cm length upon request.


Puncture Needle


Highly precise, atraumatic bevel tip needle

Specifications


18G x 7cm
20G x 4cm
21G x 7cm
B-IN-18G7
B-IN-20G4
B-IN-21G7
products

Hemostasis Y: Push-Pull / Rotating /Click type


Large bore
Compatible with catheters from 4Fr upto 9Fr and guide wires from 0.014″ to 0.038″ dia
Rated pressure 480 PSI

Spcl. feature of Click Y
Septum can be used in OPEN, SEMI OPEN and
FULL CLOSED position

Customised Extension Lengths Available Upon Request

Ordering Information


Hemostasis Y Standard BHYL-03
Hemostasis Y Click Type BHYL-04
Hemostasis Y Push/Pull BHYL-05
Hemostasis Y Click Type includes Ext. Line 25cms – 4 way BHYL-04-10

Hemostasis


Torque Device


Perfect grip for easy manipulation of guidewire

Specifications


BTD-02
BTD-02

Insertion Tool


Insertion Tool/Blunt Needle 20GX10cm

Specifications


B-BN20G10
B-BN20G10

Inflation Device


Rated pressure 30 bar/430 PSI Ergonomic Handle/Gun Type

Specifications


B-ID-30
B-ID-30

Radial Band


Ordering Information


BOT-92
BOT-92

Pre-assembled kits for the convenience & quick set during cath lab procedures

Customised as per procedural needs & Cath Lab protocols.

Ordering Information/ Contents

 

BKT-53RN Manifold 3 Port R/On, IV Set, Contrast Line, 10ml  Control Syringe,  40″ PM Line,
‘Rotating’ Haemostasic Y, Torque Device, Bullet Needle, 20″ M/F extension &
Injector  Connector.
BKT-54RN Manifold 2 Port R/On, IV Set, 10ml  LL Syringe,  40″ & 20″ PM Line, 10ml  syringes
BKT-342 Hemostasic Y ‘Click-Press’ type with 10″ extension, Torque Device & Blunt Needle.
BKT-344 Hemostasic Y, ‘Rotating ‘ type, Torque Device, & Blunt Needle
BKT-365 Accessories Kit Includes  Haemostasic Y Click Type, Torque Device, Needle.
BKT-509 Haemostasic Y, ‘Push-Pull’ type with 10″ extension, Torque Device, & Blunt
Needle
BKT-506 Inflation Device 30atm, Haemostatic Y ‘Rotating’ type, Torque Device, & Blunt
Inflation Device

(Customised kits available upon request)

Size Colour Sheath Dilator Needle Guidewire Part No
OD
mm
ID
mm
Length cm Size guage Length cm Size guage Length cm Size inch Length cm
10 F FUCHSIA 4.29 3.40 10 10F 15.0 18 7.0 0.035 45 BIS-10F18G35
9 F BLACK 3.96 3.07 10 9F 15.0 18 7.0 0.035 45 B-IS-9F18G35
8 F BLUE 3.58 2.74 10 8 F 15.0 18 7.0 0.035 45 B-IS-8F18G35
7 F ORANGE 3.25 2.41 10 7 F 15.0 18 7.0 0.035 45 B-IS-7F18G35
6 F GREEN 2.94 2.15 10 6 F 15.0 18 7.0 0.035 45 B-IS-6F18G35
5 F GRAY 2.64 1.85 10 5 F 15.0 18 7.0 0.035 45 B-IS-5F18G35
5 F GRAY 2.64 1.85 10 5 F 15.0 21 4.0 0.018 45 B-IS-5F21G18
4 F VIOLET 2.28 1.49 10 4 F 15.0 21 4.0 0.018 45 B-IS-4F21G18
SIZES AND SPECIFICATIONS- RADIAL WITH HYDROPHILIC WIRE
6 F GREEN 2.83 2.20 7.4 6 F 13.0 20 4.0 0.025 45 B-IS-6F20GC25SSR*
5 F GRAY 2.54 1.89 7.4 5 F 13.0 20 4.0 0.025 45 B-IS-5F20GC25SSR*

Seldinger technique.
Dilator locking prevents retrograde movement.
All sets include syringe of 2.5 ml & surgical blade.

 

Variants available upon request.

Seldinger technique

Customized Cath lab Procedure Packs are available as per user defined requirements and specifications.

Choice of wide range of components, customized pre-assembled Cath Lab kits and additional procedure accessories such as:

Towel clamp, Forceps, Swab gauze, Gallipot, Bowls (250ml, 450ml, 1000ml), Kidney Bowls (500ml, 700ml), Scalpel Blade, Sponge stick/swabs, Scissor, Fluro Cover, Trolley covers, Gowns (absorbent, non absorbent), Hand Towels, Cath Lab Drape with fenestration.

Customized Drape Set With Penetrations & Release Material Contact Our Representative For Customized Drawings

Cath lab Procedure Packs